Self-adhesive effect! Quick drying: 15-30 minutes! Elastic bond with the base! The highest adhesion among bituminous primers! Affixed to both the dry and on wet ground! Does the most important: a strong flexible connection between the substrate and the due waterproofing.
ISOMAX-ELASTA - THE UNEXPECTED FLEXIBILITY !!! 900% elasticity Quick drying - up to 4 hours Extreme durability - over 15 years UV-rays resistant 100% ecological
Exceptionally low water absorbtion - less than 1%. For waterproofings being constantly under water! Very short drying time - less than 2 hours /at 23°C and 50% humidity/. Very strong adhesion /over 2 Mpa/ - resistance to opposite water pressure. Can be applied on fresh concrete.
Under floorings or instead of floorings! Can be applied down to 0°C !!! Outstanding waterproofing! You can walk over it! Low wearing!
The basic diffenrence between roll-on bitumen materials and "ISOLOR" pastes is the method of forming the waterproofing membrane. When using roll-on bituminous waterproofing membranes, the membrane is produced in the manufacturers' fabrics and has to be installed on the substrate through glueing with hot bitumen or by a gas-brener. This is hard and ineffective process, resulting in waterproofing membrane, that is not fully glued to the substrate, with numerous joints and splices.
When using waterproofing pastes "ISOLOR" and non weavered polyester viel, the waterproofing membrane is executed directly on the substrate, through "layer-by-layer" method, forming a membrane with the exact shape of the substrate.
The most important advantage in using "ISOLOR" pastes is the temperature resistance. Isomax products are capable of holding down temperatures in the range of -40°C to 140°C! In addition, our secret "aging protector" inside the materials is what makes the bitumen last longer, over 10 years.
Moreover, you obtain a continuous, jointless waterproofing membrane, covering 100% of the substrate. This way, you avoid the biggest disadvantage of the roll-on materials - the presence of splices and joints.
In the course of the past 21 years, "ISOLOR" pastes have proved themselves, as an universal solution to all kinds of problems which can appear when executing waterproofings, no matter what the substrate is: roofs, terraces, pools, basements, foundations, thermoisolations, metal constructions, plastics, etc.
Method of execution:
The quality characteristics of ISOLOR waterproofings are guaranteed if precisely observing the technology of execution:
"ECOPrimer Isolor" has to be brushed over the well cleaned substrate. After it's drying, (approx. 20 min) layers of ISOLOR paste and reinforcing material are laid. The number of layers depends on the kind of the substrate (underground, terraces, roofs)
Paste layers are laid manualy /with long-hair brush/ or mechanicaly /with special dispersers/. Work temperature of air - not less 5°C. Until full drying of the current layer, the latter has to be prevented from rain and freezing.
For contacts - Aleksandar Shenkov - email@example.comBack Home